Great prices on RS232 RS422 RS485 Interface Converter with Opto Isolation, full duplex, 2wire, 4wire, db25 connector, opto isolation

  

Model 245 - RS-232 to RS-422/RS-485 Optically Isolated Interface Converter

 
Features
  • Total Isolation
  • Selectable RS-422 or RS-485
  • Selectable 2 or 4 wire RS-485
  • Intelligent Control of RS-485
  • TD & RD LED's on Each Side of Opto Barrier
  • Data Rates up to 128 KBPS

Product Description

The Model 245 RS-232 to RS-422/RS-485 Optically Isolated Interface Converter is an optically isolated version of the Model 285. When operating as an RS-232 to RS-422 interface converter, the Model 245 converts full duplex data, TD and RD, between RS-232 and RS-422.When operating in RS-485, Model 245 has an "intelligent" mode which provides control of the RS-485 line. The Model 245 controls its transmitter data flow in two ways, the use of RTS, pin 4 of the RS-232 port, or turning it on when TD data is applied to the RS-232 port. In the 2-wire mode when no data is received by the RS-232 receiver, the RS-485 receiver is switched ON. When data is detected for transmission the receiver is switched OFF. In the 4-wire mode the RS-485 receiver is constantly ON while the transmitter is switched as required. The Model 245 has an eight-position dip switch that is used to select the following:

RS-422 mode - 4 wire
RS-485 mode - 2 wire or 4 wire
RS-485 mode - controlled by the RTS, DTR or data

220-Ohm terminator

A DTE/DCE switch reverses pins 2 and 3 of the RS-232 interface. TD and RD LED's on each side of the optical barrier help verify operation.

Both ports of the Model 245 are implemented with DB-25 connectors; a male for RS-232 and female for RS-422/RS-485. Four different power options are offered, 110 volt AC, 60 Hz or 220 VAC, 50 Hz via adapters.
  

Model Description Price Product Info QTY AVAIL BUY NOW!
RS-232 to RS-422/RS-485 Optically Isolated Interface Converter - 110 Volts Specifications Manual Application Note
RS-232 to RS-422/RS-485 Optically Isolated Interface Converter - 220 Volts Specifications Manual Application Note
RS-232 to RS-422/RS-485 Optically Isolated Interface Converter - 24 Volts Specifications Manual Application Note

Quantity discounts for five or more of these items may apply.
Discounted prices shown in Shopping Cart.

Please make a selection.